Flowflex SARS-CoV-2 Antigen Rapid Test lollipop 1pc
Rapid antigen test for the detection of Covid-19 antigen from saliva. A test for the quality detection of SARS-CoV-2 antigen in saliva samples directly from individuals suspected of having COVID-19 within the first seven days of symptom onset.
The kit may also test samples from asymptomatic individuals limited to contacts with confirmed or probable cases or other epidemiological reasons for suspecting COVID-19 infection.
The results are used to identify the SARS-CoV-2 antigen. This antigen is usually found in samples taken from the upper respiratory tract during the acute phase of infection. Positive results indicate the presence of viral antigens, but individual anamnesis and other diagnostic information are necessary to determine infection.
Negative results in people with symptoms lasting longer than 7 days should be considered likely negative.
Clinical sensitivity, specificity and test accuracy: Relative sensitivity: 95%Relative specificity:
95%98.18% confidence.
Producer:
SARS-CoV-2 Antigen Rapid Test (Self-Testing): ACON Biotech (Hangzhou) Co., Ltd. No.210 Zhenzhong Road, West Lake District, Hangzhou, P.R.China, 310030
Lollipop Test: Shangyu Dongshan Precision Plastics Co., Ltd. 273 Middle YueXiu Road, Shangyu, Zhejiang, China, 312300
The set includes:
Test cassette 1 pc Saliva lollipop test 1 pc Trash bag 1 pc Package leaflet 1 pc
Dosage and method of use
Before performing the test, allow the test kit to reach room temperature (15-30C) and read the instructions carefully. Disinfect your hands before starting. Before starting the test, make sure your hands are dry.
- Open the package on the side of the lollipop stick. Caution: Do not touch the absorbent tip of the lollipop with your hands.
- At least 3 breaths to remove mucus from the back of the nose and throat. Then take a deep breath and cough strongly without spitting.
- Put the lollipop in your mouth for at least 30 seconds to saturate the end with saliva and soften. Wipe the top and bottom of their tongue. Do not bite until the end of the lollipop. Remove the lollipop from your mouth and test immediately.
- Place the test cassette on a flat, clean surface. Slide the end of the lollipop sponge into the test cartridge holder and push down until the middle of the lollipop snaps into the cassette.
- Check the result after 15 minutes. Do not detect the result after more than 30 minutes.
Interpretation of results:
Negative: Only the control comma (C) is displayed, but not the test comma (T). This means that no SARS-CoV-2 antigen has been detected. A negative test result indicates that you probably don't currently have COVID-19. When in contact with others, continue to follow all appropriate rules and protective measures. You can have the infection even if the test is negative. If you suspect, repeat the test after 1-2 days, as coronavirus cannot be accurately detected at all stages of infection.
Positive: A control line (C) and a test line (T) are displayed. This means that the SARS-CoV-2 antigen has been detected. Note: Any weak line in the test line (T) area should be considered positive. A positive test result means that it is very likely that you currently have COVID-19.
Invalid: Control line (C) is not displayed. The probable reason for an invalid result is insufficient sample volume or incorrect procedure. Read the instructions again and test again with the new cartridge.
Notification
Do not use the test after the expiry date indicated on the sachet.
Do not eat, drink or smoke before and during the test.
If the sachet is damaged, do not use the test.
All used tests, samples and potentially contaminated materials should be disposed of in accordance with local regulations.
Humidity and temperature may adversely affect the results.
The test line for a sample with a high viral load can become visible within 15 minutes or as soon as the sample passes through the test line area.
The test line for a sample with a low viral load can be visible within 30 minutes.
If nosebleeds occur, do not collect nasal swab samples.