Fc Liftoceutical face lifting 30 ml

As the aging process progresses, the skin loses its elasticity, muscle tension decreases and the subcutaneous fat layer disappears. A facelift is the smoothing and lifting of anatomical structures to smooth out facial wrinkles, which creates a younger looking face. The aim of facelift is to achieve a younger, flexible, rested and natural appearance of the face. The active substances contained in the biotechnological emulsion Liftoceutical help in rejuvenating the skin of the face, smooth out wrinkles, clean and tighten sagging skin.
A biotechnological active substance with a double focus, it strengthens the dermo-epidermal connection and stimulates the protein synthesis of the skin. After years, the adhesion between epidermal and dermal cells is reduced, resulting in a loss of skin elasticity.
Another of the most visible signs of skin aging is the increased formation of wrinkles on the face. Aging is a natural phenomenon, associated with certain biochemical, histological and physiological changes, which is also supported by exposure of the skin to the external environment. There are other secondary factors that can cause the appearance of characteristic wrinkles and furrows on the face.
Biotechnological emulsion Liftoceutical reduces visible changes in contours, reduces the loss of skin elasticity, improves the renewal of the cellular process, stimulates the synthesis of collagen, elastin and glycosamine, strengthens, tones and hydrates the skin, reduces the obvious signs of aging such as double lines and deep wrinkles, maintains the youthful appearance of the skin. The product is intended for both women and men. An important advantage of the product is that the results are achieved without surgery.
The product significantly affects the condition and appearance of the skin, therefore it represents the highest category of skin care – cosmeceutical.

Use and dosage:
Remove the cap from the product. Press the dispenser gently to squeeze out the required amount of emulsion. Attention - when you quickly press the dispenser, air bubbles are absorbed, which would make the next procedure more difficult!
Apply the Liftoceutical emulsion to the index finger with which you will apply the product. On clean and dry skin, apply the necessary amount of the product, approximately the size of a pea, and apply to the entire face with a circular massage. The product is so gentle and gentle that you can also apply it around the eyes. The product is suitable for daily use. The maximum effectiveness of the product will be seen after 90 days when applied twice a day in the morning and evening. To maintain a favorable skin condition, it is recommended to apply the product once a day. The preparation can also serve as a base for make-up. The biotechnological emulsion contains an effective UV filter and is intended for all skin types.

Notice
The product is very well tolerated and can be used on all skin types. Nevertheless, due to its high effectiveness, it is recommended to test the Liftoceutical biotechnological emulsion on a piece of skin before using the product. The use of the product may cause slight skin tension, which is a manifestation of the rapid onset of the effect of the product. Test the skin's reaction by applying the product to a small area of ​​the treated area and wait 24 hours before applying completely. If you experience irritation or increased sensitivity, stop using the product. Avoid contact with eyes. If the product gets into the eyes, rinse them thoroughly with water and gently dry them.
For external use only. Store at a temperature of up to 30 ºC.

Description:
We present to you the product Liftoceutical biotechnological emulsion - an alternative to surgical removal of the face - facelift, which contains the following active substances:

► The active substance, a biotechnologically processed yeast extract, improves the quality of the dermis, increases the synthesis of elastin and collagen, thereby increasing the tension of the skin of the face, which leads to significant smoothing and lifting effect. The active substance, by acting on the multifunctional proteoglycan, which binds to the components of the extracellular matrix and molecules of the cell surface, ensures the preservation of the dermo-epidermal connection. A very thin structure (75nm) is located at the intersection of the two most important layers of the skin: the dermo-epidermal junction (DES). The main task of this structure is to ensure cohesion between the dermis and the epidermis.

The importance of this connection to the maintenance of skin functionality is that the preservation of DES is a major goal of anti-aging cosmetic skin treatments. If the DES is damaged, the cohesion and communication between the dermis and the epidermis is interrupted, thus creating a prerequisite for the formation of wrinkles. When preventing aging, it is therefore inevitable to act on the structure of the dermis and its connection to the epidermis through DES.
This primary and important component of DES is a proteoglycan synthesized by fibroblasts. It plays an important role in the stabilization of DES by acting together with various components such as laminins and collagen IV.
The synthesis of the multifunctional proteoglacan, which binds to the components of the extracellular matrix and molecules of the cell surface, declines with age, and therefore it is important to stimulate it in order to preserve the functionality of DES. Through the action of the derma and DES, the active ingredient offers a complete competence against wrinkles, the effectiveness of which has been proven in clinical tests and in consumer tests.

►Active substance Palmitol Oligopeptide, which is based on wound healing research technology. This complex process requires a sophisticated system of cellular communication. Almost as much as it is possible to restore the damaged parts of the skin, it is necessary to eliminate the disturbed intercellular material. Both elimination and regeneration are initiated sequences of peptides that are created by enzymatic cleavage of macromolecules.
These specific sequences are biologically active and play an important role in wound healing. Wrinkles can be likened to the "destroyed" parts of the skin, therefore the skin tissue is damaged by the aging process, the upper layers of the skin become loose and form wrinkles. Local application of correctly defined active peptides can initiate a regeneration process that is comparable to wound healing. In addition, the delivery of intercellular matter, between epidermal keratinocytes, can restore and improve the integrity of the skin. The active substance contains a biologically active peptide (the flexible part of elestin) in vectorized form in combination with ceramide 2, which occurs naturally in our skin.
This combination allows stimulation of cellular communication and earlier repair of damage caused by age, with strong anti-wrinkle activity. The protective skin barrier is improved, thus helping to maintain proper skin hydration.

Features summary:

• stimulates cell communication thanks to biologically active peptides
• contains a flexible part of elestin
• strong rejuvenating wrinkle smoothing activity
• restoration of age-damaged skin by stimulation of fibroblasts
• strengthening the protective skin barrier

► The preparation contains an active substance - a hexapeptide, which is a firming active substance that supports dual cell activity - keratinocytes and fibroblasts.
It increases the synthesis of laminin-5, 6-integrin and hemidesmosome, thereby strengthening the dermoepidermal connection.
As we age, the adhesion between epidermal and dermal cells decreases, resulting in a loss of skin elasticity.

►Another of the active ingredients is a mimic peptide of such connecting chains, which have been proven to regulate fibrologenesis, control the proportion of collagen fibrils and increase the elasticity of the skin.
Fibrologenesis is a fundamental process in the formation of tissue, but it must be controlled and regulated to prevent excessive accumulation of collagen. Control of fibrillogenesis is the task of decorin, a small leucine-rich proteoglycan, which is associated with collagen fibrils at specific binding sites in the protein core, thereby controlling fibril size, uniformity of their proportion, and regular distribution. Aging skin contains a limited form of decorin, which lacks connecting areas with collagen fibrils, which has a negative effect on skin elasticity.

►Liftoceutical biotechnological emulsion contains hyaluronic acid in liposome form - liposomes are round vesicles composed of specific lipids. They may contain proteins, peptides or other active ingredients that play an important role in maintaining the firmness and elasticity of the skin. Liposomes work together with epidermal cells, into which they release their contents. PML (Plurilamellar multivesicular liposomes) containing Na-hyaluronate are polycentric phospholipid vesicles that contain sodium hyaluronate and have the ability to release the active substance into the epidermis. Sodium hyaluronate is used in the treatment of dry skin due to its excellent and lubricating properties. It plays a major role in retaining moisture and maintaining the integrity of the skin structure. Softens skin exposed to sunlight,

►Other active ingredients of the preparation are peptides that act on mimic wrinkles. Along with the continuous improvement of information about the process of wrinkle formation, our ability to prevent this process also increases. Wrinkles that form as a result of facial expressions, repeated movements, harmful environmental influences and natural aging of the skin are no longer an unsolvable problem.

►Liftoceutical biotechnological serum contains a pentapeptide that acts around the presynaptic neuron earlier than hexapeptide and heptapeptide. The body has a slight electrical charge. With repeated movements, the electrical charge in a given body part increases. The pentapeptide helps moderate the release of acetylcholine at the time of the SNARE complex by reducing the electrical charge of the skin in the area of ​​application, thereby reducing neuronal activity. Neurons induce muscle movement by binding to acetylcholine of submuscular cells, i.e. the ability to reduce the electrical charge, sending it to the area of ​​application, has a fundamental effect on the reduction and relaxation of muscle contractions. Due to the weakening of muscle contractions, the skin looks younger, wrinkles are reduced and formed in smaller quantities.

►Liftoceutical biotechnological emulsion contains heptapeptide – a natural amino acid that contains seven aminopeptides. Its advanced peptide structure can stop pore formation and neurotransmitter release more effectively than any other amino peptide. Heptapeptide is essentially a higher level amino peptide that acts faster and reduces the depth of wrinkles that other peptides cannot achieve. Heptapeptide can do this by binding to the existing Snap-25 receptor to block the release of acetylcholine. As a result, neurons cannot effectively transmit signals that cause muscle contractions. If repetitive movements are limited, the formation of fine lines and wrinkles can be reduced or completely prevented.
The process of skin tightening and muscle contraction that causes wrinkles to form depends on a delicate neurotransmission process called the SNARE complex. The SNARE complex consists of three proteins (snap 25, vamp, and syntaxin) that enable neurons to perform exocytosis. Exocytosis is the release of chemicals across the neuron synapse that causes muscle contraction. If exocytosis is prevented or interrupted, muscle contractions are stopped or reduced, thereby relaxing existing wrinkles and preventing new wrinkles from forming.

Liftoceutical biotechnological emulsion is an alternative to surgical removal of the face - facelifting. The triple effect smooths out wrinkles, turns off contours, the skin becomes vital and elastic. It contains an effective UV filter and is suitable for all skin types.
Herb-Pharma AG follows up on the latest results of pharmacological and dermatological research.

Packaging:
30 ml